Downpipe accessories
Sought-after, handcrafted accessories adapted to commercial zinc and copper downpipes in sizes from 60 to 120 mm. Other diameters or shapes upon request. Also see “Individual products.”
Pipe branches
For the joining of downpipes of the same or different size.
Standard number of degrees: 60° and 72°
Standard height: 250 mm
Also available as a double pipe branch or Y-piece
Gutter leader box
For the collection of larger amounts of water, integrated into the roof gutter or as a wall tank as the end piece of the downpipe. With and without an overflow outlet.
Standard size: 300 x 220 x 220 mm (height x width x depth)
Diameter: 76 - 120 mm
Adapter from a square downpipe to a round standpipe
For the connection of square downpipes to round standpipes made of galvanised sheet metal, copper, cast iron or soil pipes. Insertable, usable with or without a standpipe cap.
Diameter: 80/80 mm or 100/100 mm to Ø 100 or Ø 110 mm
Water collector with hose connection
For collecting rainwater in a water drum. Unobstructed water flow, particularly stable design. Including drum connection and 33 cm, 1-inch hose.
Diameter: 76 - 120 mm
Segment bends
Attractive connection of the roof gutter to the downpipe. Pivoted in or out. Individual segments beaded and soldered in handcrafted quality. With telescopic pipe bracket.
Diameter: 60 - 120 mm
Outreach: 250 - 1490 mm
Right-angled pipe bend
An almost right-angled (87°) connection between the roof gutter/downpipe and the downpipe. Can be manufactured with any number of degrees as mitre-soldered.
Diameter: 60 - 120 mm
Drain pipe reduction
For the connection of one downpipe to another with a smaller diameter
Diameter: From 60/50 mm to 150/120 mm
Water distributor
For the diversion of rainwater into a pond or cistern. Depending on the direction of rotation, the water either continues to flow through the main pipe or it flows through the side pipe.
Diameter: 80 and 100 mm